<tbody id="lvxjo"><noscript id="lvxjo"></noscript></tbody>
<dd id="lvxjo"></dd>

網站公告:

產品中心

濟南精拓流體設備有限公司

電話:0531-69951198

郵箱:jingtuolt@163.com

傳真:0531-69951198

地址:濟南市歷城區西周南路9號

網址:http://www.aiqin1.cn

常見問題

當前位置:首頁 - 新聞中心 - 常見問題 - 氣體增壓設備與氣液增壓設

氣體增壓設備與氣液增壓設備的操作區別在哪?

發布時間:2019-01-31 16:49:32   發布人:http://www.aiqin1.cn
氣體增壓設備:
Gas Supercharging Equipment:
面板配置:三塊表:驅動氣壓壓力表,被增壓氣體壓力表,高壓氣體壓力表等
Panel configuration: three meters: driving pressure gauge, pressurized gas gauge, high pressure gas gauge, etc.
閥門:驅動氣壓調壓閥,驅動氣源開關,高壓氣體開關,和卸荷閥等
Valves: driving pneumatic pressure regulating valve, driving gas source switch, high pressure gas switch, and unloading valve, etc.
操作步驟:(針對打壓容器較大的)
Operating steps: (for large pressure vessel)
預充氣壓階段:關閉卸荷開關連接驅動氣源管路打開驅動氣體開關打開高壓氣體開關即可(將比較大的容器預充與空壓機氣壓平衡的壓力,以便縮短打壓時間,延長增壓機使用壽命)
Pre-charging stage: close unloading switch, connect driving gas source pipeline, open driving gas switch and open high-voltage gas switch. (Pre-charging larger container with pressure balanced with air compressor, in order to shorten the pressing time and prolong the service life of supercharger)
打壓階段:關閉卸荷開關關閉高壓氣體開關連接驅動氣源管路打開驅動氣壓開關調節驅動氣壓壓力表(稍微向上拔起,按“+“-”方向調節壓力大小固定驅動氣壓壓力值(輕微向下按下,固定驅動氣壓壓力值)打開高壓氣體開關增壓機工作達到設定壓力關閉高壓氣體開關保壓打開卸荷開關完成操作。
Pushing stage: close unloading switch, close high-pressure gas switch, connect driving gas source pipeline, open driving gas pressure switch, adjust driving pressure gauge (slightly pull up, adjust pressure in the direction of'+'-') Fixed driving pressure value (slightly press down, fixed driving pressure value) Open high-pressure gas switch booster to achieve set pressure, close high-pressure gas. The body switch keeps the voltage and opens the unloading switch to complete the operation.
氣體增壓泵
氣液增壓設備操作步驟:
Operating steps of gas-liquid supercharging equipment:
面板配置:
Panel configuration:
事先注滿水:針對檢測件較大的情況,建議事先將被測試件注滿水,以便縮短增壓機打壓時間,延長使用壽命
Pre-filling water: In view of the larger test pieces, it is suggested that the test pieces be pre-filled with water in order to shorten the pressurizing time of the supercharger and prolong its service life.
連接被測試件關閉卸荷閥關閉高壓液體開關連接驅動氣源管路打開驅動氣源開關調節驅動氣源壓力表(輕微向上拔下,按照“+”“-”方向調整壓力大小>固定驅動氣源壓力值(輕微向下按下)打開高壓液體開關增壓機工作達到設定壓力增壓機停止工作保壓關閉高壓液體開關即可保壓結束打開卸荷開關檢測完成
Connect the test piece to close the unloading valve, close the high-pressure liquid switch, connect the drive gas source pipeline, open the drive gas source switch, adjust the pressure of the drive gas source pressure gauge (slightly pull up, adjust the pressure according to the direction of +"-">fix the pressure value of the drive gas source (slightly press down). Open the high-pressure liquid switch supercharger to set the pressure supercharger to stop working and keep the pressure closed. The liquid switch can hold the voltage and finish the detection of the unloading switch.

13188935873

qq

2018狗不理玄机1一1 合川市| 洞头县| 山阳县| 舒城县| 庆阳市| 永清县| 福海县| 东乡县| 安新县| 师宗县| 云霄县| 大姚县| 海晏县| 扎赉特旗| 缙云县| 保靖县| 沾化县| 绥芬河市| 柳河县| 盐源县| 米易县| 岳西县| 新龙县| 曲阜市| 安康市| 资讯| 丰城市| 泌阳县| 凤凰县| 闻喜县| 深泽县| 秀山| 枝江市| 青神县| 双柏县| 乌海市| 恩施市| 舒兰市| 浙江省| 武宁县| 望江县| http://v.sinadg5.pw http://m.60elmn.top http://www.126ai.cn http://v.vylnhj.top http://china.lsj3k1.pw http://ws3ond.top