<tbody id="lvxjo"><noscript id="lvxjo"></noscript></tbody>
<dd id="lvxjo"></dd>

網站公告:

產品中心

濟南精拓流體設備有限公司

電話:0531-69951198

郵箱:jingtuolt@163.com

傳真:0531-69951198

地址:濟南市歷城區西周南路9號

網址:http://www.aiqin1.cn

業內資訊

當前位置:首頁 - 新聞中心 - 業內資訊 - 氣動液體增壓泵的選擇應該

氣動液體增壓泵的選擇應該注意什么?

發布時間:2019-04-01 11:36:39   發布人:http://www.aiqin1.cn
工作壓力和流量
Working Pressure and Flow
氣動增壓泵和動力單元的工作壓力參照驅動氣壓為0.48Mpa時泵輸出壓力和流量。假如泵的最大輸出壓力大于所需的工作壓力,這就要思索平安措施。關于最大輸出壓力,請參照產品目錄中的“靜態下驅動氣壓力和輸出液壓近似比率表”。動力單元的選型與泵分歧。關于工作流量,請參照產品目錄中的“性能曲線圖”。
The working pressure of pneumatic booster pump and power unit refers to the output pressure and flow rate of the pump when the driving pressure is 0.48Mpa. If the maximum output pressure of the pump is greater than the required working pressure, it is necessary to consider safety measures. For maximum output pressure, please refer to the "Approximate Ratio Table of Driving Pressure and Output Hydraulic Pressure under Static Conditions" in the catalogue. The selection of power unit is different from that of pump. For workflow, please refer to the "Performance Curve" in the product catalogue.
驅動氣體的壓力和流量
Pressure and flow rate of driving gas
氣動增壓泵和動力單元在連續工作時運用的驅動氣壓不超越0.69Mpa,在間歇工作時可到達1.03Mpa。在最佳性能狀態時氣動泵的耗氣量,請參照所需驅動氣體流量表。
氣體增壓泵
The driving pressure of pneumatic booster pump and power unit in continuous operation is not more than 0.69 Mpa, and it can reach 1.03 Mpa in intermittent operation. In the best performance state, the air consumption of the pneumatic pump, please refer to the required driving gas flow meter.
保送液體介質
Delivery liquid medium
氣動增壓泵泵保送的液體介質是氣動增壓泵的選型中著重思索的局部。液壓局部的材質和液壓密封圈是由保送的液體介質所決議的。泵可用油、水和大多數液體介質。規范泵的主要液壓密封圈是丁橡膠和聚氨酯,單向閥座采用特氟龍密封。其它密封資料包括碳氟化合物和亞乙基丙烯,這些密封資料主要用于保送的特殊介質。請向工廠或當地的分銷商咨詢密封資料選型。
The liquid medium guaranteed by the pneumatic booster pump is the focus of consideration in the selection of the pneumatic booster pump. The material of the hydraulic part and the hydraulic seal ring are determined by the liquid medium for delivery. Pumps can use oil, water and most liquid media. The main hydraulic sealing rings of standard pumps are polybutadiene rubber and polyurethane, and the one-way valve seats are sealed with Teflon. Other sealing materials include fluorocarbons and ethylene propylene, which are mainly used for special medium for delivery. Please consult factory or local distributor for seal information selection.
氣動增壓泵可承受的體積和重量關于某些的應用,氣動增壓泵和動力單元的外形尺寸和重量也要重點思索
The volume and weight that pneumatic booster pumps can bear. For some applications, the shape size and weight of pneumatic booster pumps and power units should also be considered.
本文的精彩內容由氣體增壓泵提供知識提供,本網站還有很多的精彩內容,更多的內容您可以點擊進入:http://www.aiqin1.cn 我們有專門的客服為您解答問題
The wonderful content of this article is provided by the knowledge of gas booster pump. There are many wonderful contents on this website. You can click on more content to enter: http://www.aiqin1.cn. We have a special customer service to answer your questions.

13188935873

qq

2018狗不理玄机1一1 鄂尔多斯市| 浠水县| 从化市| 长岭县| 瓦房店市| 八宿县| 阳新县| 平江县| 泗阳县| 霸州市| 平顶山市| 海口市| 莱芜市| 牡丹江市| 陵水| 深州市| 滨州市| 六枝特区| 凉山| 河曲县| 浠水县| 太湖县| 和林格尔县| 翁源县| 诏安县| 邳州市| 宜宾市| 维西| 宿松县| 玉溪市| 张北县| 平湖市| 大安市| 安阳县| 丽水市| 洛隆县| 九龙县| 衡阳市| 苏州市| 汉阴县| 古丈县| http://www.able17e.biz http://wap.lsjc09.club http://baidu.60elmn.top http://www.ks664.cn http://www.lsjf3a.club http://www.an812.cn